Service Installation Guide
Service Tools Required:
- Multimeter for electrical testing
- Torque wrench set
- Service diagnostic software
- Pressure gauge for water system
- LG service toolkit
Professional Service Installation Steps
- Pre-Installation Inspection: Verify all components and check for transportation damage before installation.
- Remove Service Protection: Remove all shipping materials and service protection components.
- Water System Connection: Install and test water supply lines with pressure verification.
- Drain System Setup: Configure drain system with proper height and backflow prevention.
- Electrical Service Connection: Connect to dedicated circuit with proper grounding and voltage verification.
- Calibration and Leveling: Precisely level the unit and calibrate all sensors and components.
- Service Test Run: Perform comprehensive diagnostic cycle to verify all systems operation.
Technical Specifications
| Service Model Series | LGWM-SVC-9500 |
| Machine Type | Front Load Service Washing Machine |
| Service Color Code | Professional Silver |
| Service Capacity | 9.5 kg Professional Grade |
| Service Noise Level | 50 dB / 68 dB |
| Service Control System | Advanced Service Diagnostics with LCD |
| Service Energy Rating | A+++ Service Efficiency |
| Service Water Consumption | 9,200 L/year Optimized |
| Service Power Requirements | 230V, 50Hz, 12A Service Grade |
| Service Dimensions | 85 x 60 x 59 cm Service Standard |
| Service Weight | 71 kg |
| Service Spin Speed | 1400 RPM Professional |
Service Warranty Information
- Service Warranty: 3 years comprehensive service coverage
- Motor Service Warranty: 12 years on Direct Drive Motor
- Extended Service: Professional service contracts available
For service support, contact LG Service Center at 1-800-243-0000 or visit LG Service Portal
Service Features
Service Direct Drive Motor
Professional grade Direct Drive motor with enhanced service diagnostics and maintenance monitoring for reliable long-term operation.
Service Inverter Technology
Advanced service inverter system with comprehensive diagnostic capabilities and performance optimization features.
Service 6 Motion DD
Professional service motion control system with individual component monitoring and performance verification.
Service Steam System
Enhanced steam technology with service diagnostics for optimal performance and maintenance scheduling.
Service SmartThinQ
Professional service connectivity with remote diagnostics, performance monitoring, and predictive maintenance alerts.
Service TurboWash™
Optimized service washing system with performance tracking and efficiency monitoring for professional results.
Service Motion Technology
Service Tumbling
Professional service motion control for delicate fabric handling
Service Swinging
Advanced service motion for synthetic fabric optimization
Service Scrubbing
Professional service cleaning action for heavy soil removal
Service Filtration
Enhanced service filtration system maintenance
Service Stepping
Professional service wool care system
Service Swinging
Advanced service bedding care technology
Advanced Service Troubleshooting
| Service Problem | Technical Cause | Service Solution |
|---|---|---|
| Service startup failure | Power supply issue, control board fault | Diagnose power circuit, test control board components |
| Service cleaning performance | Pump failure, sensor calibration | Test pump operation, recalibrate sensors |
| Service drainage issue | Drain pump failure, hose obstruction | Test drain pump, inspect and clear drainage system |
| Service water leakage | Seal failure, connection issue | Inspect and replace seals, verify all connections |
| Service abnormal noise | Bearing wear, motor issue | Diagnose bearing condition, test motor assembly |
| Service vibration | Mounting issue, balance system | Check mounting hardware, test balance system |
Service Error Codes
- SE: Service electrical issue - Diagnose power supply and control systems
- DE: Service drain error - Test drain pump and system
- WE: Service water error - Check water valve and flow systems
- ME: Service motor error - Comprehensive motor diagnostics
- CE: Service control error - Control board diagnostics
- BE: Service balance error - Balance system calibration
Service Manual Downloads
Current Service Manuals
LGWM-SVC-9500
9.5kg Service Washer
LGWM-SVC-9500S
9.5kg Steam Service
LGWM-SVC-9500T
9.5kg ThinQ Service
LGWM-SVC-9500W
9.5kg White Service
Legacy Service Manuals
LGWM-SVC-10500
10.5kg Service Washer
LGWM-SVC-9000S
9kg Steam Service
LGWM-SVC-9000T
9kg ThinQ Service
LGWM-SVC-8000
8kg Service Washer