Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Choose Installation Location: Select a location with adequate space for both washer and dryer units, near necessary plumbing and electrical connections.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from both washer and dryer units.
- Stack Unit Assembly: Carefully stack dryer unit on top of washer using provided stacking kit, ensuring secure attachment.
- Connect Water Supply: Connect hot and cold water supply lines to the washer water inlet valves. Use only new hoses.
- Connect Drain System: Route the drain hose into a standpipe with a high loop to prevent backflow.
- Ventilation Setup: Install proper ventilation ducting for the dryer unit according to local building codes.
- Electrical Connection: Connect to properly grounded 240V outlet for dryer and 120V outlet for washer.
- Level the WashTower: Adjust the leveling legs to ensure the unit is perfectly level from front to back and side to side.
- Test Run: Run both washer and dryer through complete cycles to check for proper operation.
Specifications
Model Series | WT7300CW / DLEX7300WE |
Type | Stacked Washer + Dryer Combo |
Color | White / Graphite Steel |
Washer Capacity | 4.8 cu. ft. |
Dryer Capacity | 7.4 cu. ft. |
Noise Level | Washer: 54 dB / Dryer: 65 dB |
Control Type | Touch Controls with LCD Display |
Energy Rating | ENERGY STAR® Most Efficient |
Water Consumption | Washer: 13 gallons per load |
Power Requirements | Washer: 120V / Dryer: 240V |
Dimensions (HxWxD) | 145 x 69 x 76 cm |
Total Weight | 158 kg |
Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Drum Warranty: 10 years on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Center Control™ Panel
All controls located at eye level between washer and dryer for easy access and intuitive operation of both units from one central location.
TurboWash™ 360°
Advanced washing technology that uses powerful jets to penetrate fabrics from multiple angles, cleaning full loads in under 30 minutes.
Sensor Dry System
Intelligent moisture sensors detect when clothes are dry and automatically adjust drying time, preventing over-drying and saving energy.
Dual Inverter Heat Pump
Energy-efficient heat pump technology recycles hot air during the drying process, using significantly less energy than conventional dryers.
SmartThinQ Technology
Wi-Fi enabled for complete remote control via smartphone app, allowing you to start, stop, and monitor cycles from anywhere.
Allergiene™ Cycle
Special cycle that uses steam technology to remove over 95% of common household allergens like dust mites and pet dander.
Smart Capabilities
Remote Start
Start laundry cycles remotely using smartphone app
Cycle Monitoring
Monitor cycle progress and receive completion alerts
Diagnostics
Smart diagnostics can identify issues and suggest solutions
Software Updates
Receive automatic software updates for new features
Energy Monitoring
Track energy and water usage through the app
Voice Control
Compatible with Amazon Alexa and Google Assistant
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Unit won't start | Power issue, door not closed, control lock activated | Check power supply, ensure doors are latched, check control lock |
Poor drying performance | Lint filter clogged, ventilation issues, overloading | Clean lint filter, check ventilation, reduce load size |
Water not draining | Drain hose clogged, drain pump filter blocked | Check drain hose, clean drain pump filter |
Excessive vibration | Unbalanced load, uneven floor, installation issues | Redistribute load, level the unit, check installation |
Error codes displayed | Various system errors | Refer to error code section below |
Steam function not working | Water supply issue, incorrect settings | Check water supply, verify steam settings |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- tE: Temperature sensor error - Contact service center
- PF: Power failure - Unit will resume when power returns
Manual Downloads
Current WashTower Models
WT7300CW
WashTower Center Control
WT7400CV
WashTower with View™ Window
WT7900HBA
WashTower Black Stainless
WT7300CA
WashTower Graphite Steel
Previous WashTower Models
WT7100CW
WashTower 2022 Model
WT7000CW
WashTower 2021 Model
WT6900CW
WashTower 2020 Model
WT6800CW
WashTower 2019 Model