Drain Hose Installation Guide
Tools Needed:
- Adjustable wrench
- Pliers
- Screwdriver
- Bucket
- Towel
Step-by-Step Installation
- Position the Washing Machine: Place the washing machine within 1.5 meters of the drain point for optimal drainage performance.
- Remove Old Hose: If replacing, disconnect the old drain hose from the washing machine and drain outlet.
- Attach to Washer: Connect the drain hose to the washing machine pump outlet, ensuring a secure fit with the clamp provided.
- Create High Loop: Form a high loop in the drain hose and secure it to the back of the washing machine to prevent backflow.
- Connect to Drain: Insert the drain hose into the standpipe or laundry sink, ensuring it is not pushed too far down (max 15 cm).
- Check Connections: Ensure all connections are tight and secure to prevent leaks during operation.
- Test Drainage: Run a short drain cycle to check for proper water flow and absence of leaks.
Drain Hose Specifications
| Part Number | 4681EA2001T |
| Material | Reinforced PVC |
| Length | 1.5 meters |
| Diameter | 25 mm (Internal) |
| Temperature Rating | -10°C to 90°C |
| Pressure Rating | 0.8 MPa maximum | Compatible Models | All LG Front Load 7-12 kg Models |
| Warranty | 2 years limited warranty |
Installation Requirements
- Minimum Height: 60 cm from floor level
- Maximum Height: 90 cm from floor level
- Drain Pipe Diameter: Minimum 30 mm recommended
- Distance from Washer: Maximum 1.5 meters
Drain Hose Features
Reinforced Construction
Made from high-quality reinforced PVC material that resists kinking, crushing, and wear, ensuring long-term durability and reliable performance.
Anti-Backflow Design
Specially designed with high-loop requirement to prevent dirty water from flowing back into the washing machine, maintaining hygiene and cleanliness.
Universal Connectors
Features standard 25mm connectors compatible with most LG washing machines and common drain systems, making installation straightforward.
Heat Resistant
Withstands temperatures up to 90°C, making it suitable for hot water wash cycles without risk of damage or deformation.
Flexible Yet Rigid
Maintains optimal balance between flexibility for easy installation and rigidity to prevent collapsing under suction pressure during drainage.
Easy Maintenance
Smooth interior surface prevents lint and debris buildup, while accessible design makes cleaning and inspection simple.
Proper Drain Hose Setup
Standpipe Installation
Insert hose into standpipe without forcing it too deep to maintain proper airflow and prevent siphoning.
Laundry Sink Setup
Secure hose over sink edge using provided hook, ensuring it doesn't slip out during high-volume drainage.
High Loop Method
Create U-shaped loop secured to back of machine at 80-85 cm height to prevent backflow effectively.
Floor Drain Adaptation
Use appropriate adapters for floor drains while maintaining proper height requirements for optimal function.
Drain Hose Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow drainage | Kinked hose, clogged filter, improper height | Straighten hose, clean pump filter, adjust height to 60-90 cm |
| Water not draining | Severe clog, pump failure, hose blockage | Check for obstructions, clean hose, inspect pump function |
| Leaking at connections | Loose clamps, worn seals, cracked fittings | Tighten connections, replace seals, inspect for damage |
| Backflow issues | Missing high loop, hose too low | Create proper high loop, raise hose to correct height |
| Hose slipping out | Loose connection, missing retainer | Secure with proper clamp, use hose retainer clip |
| Unusual noises during drain | Restricted flow, air in system, pump strain | Check for kinks, ensure proper installation, inspect pump |
Error Codes Related to Drainage
- OE: Drainage error - Check hose for kinks and blockages
- PE: Water pressure error - Verify proper hose installation
- FE: Flooding detected - Inspect hose connections for leaks
- IE: Water supply issue - May indicate drainage backflow problems
Maintenance Schedule
- Monthly: Inspect for kinks and damage
- Quarterly: Clean pump filter and check connections
- Annually: Full inspection and replacement if worn
- As Needed: Replace if cracked, hardened, or leaking
Manual Downloads
Drain Hose Manuals
4681EA2001T
Standard Drain Hose 1.5m
4681EA2002T
Extended Drain Hose 2.0m
4681EA2003T
Heavy Duty Drain Hose
4681EA2004T
Universal Adapter Kit
Installation Guides
Standpipe Setup
Proper standpipe installation guide
Laundry Sink Drain
Sink drainage installation manual
Floor Drain Adapter
Floor drain installation guide
Troubleshooting Guide
Complete drainage problem solving