Emergency Drain Procedures
Tools Needed:
- Large shallow pan or bucket
- Towels or rags
- Flat-head screwdriver
- Pliers
- Flashlight
Step-by-Step Manual Drain Process
- Power Off: Unplug the washing machine from the electrical outlet for safety.
- Access Drain Filter: Locate the drain filter access panel, typically at the bottom front of the machine.
- Prepare for Water: Place towels and a shallow pan in front of the access panel to catch water.
- Open Filter Cap: Slowly turn the drain filter cap counterclockwise to open. Water will begin to drain out.
- Drain Water: Allow all water to drain completely into the pan. Empty pan as needed.
- Clean Filter: Remove any debris or foreign objects from the drain filter.
- Reinstall Filter: Securely replace the drain filter and close the access panel.
- Check Operation: Plug in machine and run a test cycle to ensure proper drainage.
Drain System Overview
| Drain Pump Type | Direct Drive Drain Pump |
| Drain Hose Diameter | 1.5 inches |
| Maximum Drain Height | 96 inches |
| Drain Flow Rate | 15 gallons per minute |
| Filter Type | Self-cleaning debris filter |
| Drain Cycle Time | 2-3 minutes standard cycle |
| Emergency Drain Access | Front access panel |
| Water Detection | Electronic water level sensor |
Drain System Components
- Drain Pump: Direct drive motor for efficient water removal
- Drain Hose: Flexible, kink-resistant tubing
- Debris Filter: Captures lint and foreign objects
- Water Level Sensor: Monitors water levels during cycles
- Drain Valve: Controls water flow to drain system
Drain Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water won't drain | Clogged drain filter, drain hose blockage | Clean drain filter, check hose for obstructions |
| Slow draining | Partial clog, kinked drain hose | Clear debris, straighten drain hose |
| Drain pump noise | Foreign object in pump, worn bearings | Remove object, contact service if noise persists |
| Water remains in drum | Drain pump failure, electrical issue | Check pump operation, verify power supply |
| Drain error code | Sensor issue, pump malfunction | Reset machine, check error code meaning |
| Leaking during drain | Loose connections, damaged hose | Tighten connections, inspect hose for damage |
Drain-Related Error Codes
- OE: Drain time exceeded - Check for drain hose blockage
- PE: Pressure switch error - Water level detection issue
- FE: Flooding detected - Check for leaks and overfilling
- LE: Motor issue - Drain pump motor failure
- dE: Door open during drain - Ensure door is fully closed
- UE: Unbalanced load affecting drain - Redistribute load
Maintenance Guide
Monthly Drain Filter Cleaning
Regularly clean the drain filter to prevent clogs and maintain optimal drainage performance. Remove lint, coins, and other debris.
Drain Hose Inspection
Quarterly inspection of drain hose for kinks, cracks, or obstructions. Ensure proper installation and secure connections.
Pump Maintenance
Check drain pump operation during regular cycles. Listen for unusual noises that may indicate impending failure.
Drain System Flush
Every 6 months, run an empty cycle with vinegar to clean internal drain lines and prevent buildup.
Preventive Maintenance Schedule
Weekly
Check drain hose for proper positioning and kinks
Monthly
Clean drain filter and inspect for debris
Quarterly
Inspect drain pump and connections
Annually
Professional inspection of entire drain system
Manual Downloads
Drain System Manuals
TROMM F4V9RYP2T
9.5kg Drain System Manual
TROMM F4V5RYP2T
Drain Troubleshooting Guide
TROMM F4V7RYP2S
Emergency Drain Procedures
TROMM F4V9RYP2W
Maintenance Schedule
Related Documentation
LG Pump Replacement
Drain Pump Installation Guide
Error Code Reference
Complete Error Code List
Parts Catalog
Drain System Components
Service Manual
Technical Service Guide