Importance of Tub Cleaning
Why Regular Tub Cleaning is Essential:
- Prevents mold and mildew buildup
- Eliminates unpleasant odors
- Maintains washing performance
- Extends machine lifespan
- Ensures hygienic cleaning of clothes
Benefits of Using Tub Clean Function
- Deep Cleaning: The Tub Clean function uses high-temperature water to dissolve and remove detergent residue, dirt, and bacteria.
- Automatic Process: The machine automatically adjusts water temperature and drum rotation for optimal cleaning.
- Time Saving: No manual scrubbing required - the machine does all the work.
- Eco-Friendly: Uses less water and energy compared to manual cleaning methods.
- Preventive Maintenance: Regular use prevents costly repairs and maintains warranty coverage.
Cleaning Frequency
| Regular Maintenance | Every 30 washes or once a month |
| Heavy Usage | Every 20 washes or every 2 weeks |
| Hard Water Areas | Every 15 washes or weekly |
| Light Usage | Every 40 washes or every 6 weeks |
| After Illness | Immediately after washing contaminated laundry |
| Seasonal Cleaning | Before and after periods of non-use |
Signs Your Tub Needs Cleaning
- Musty Odor: Unpleasant smell from the drum
- Visible Residue: White or gray film on drum surface
- Poor Cleaning: Clothes not getting clean despite normal cycles
- Mold Spots: Black spots around door seal or drum
- Lingering Smells: Clothes retain odors after washing
For optimal performance, run the Tub Clean cycle as soon as you notice any of these signs.
Cleaning Procedure
Preparation Steps
Ensure the washing machine is empty. Remove any items from the drum, including small items that may be stuck in the door seal. Wipe the door seal and glass with a damp cloth.
Cleaning Agent Selection
Use only LG-approved tub cleaning agents or a mixture of vinegar and baking soda. Never use chlorine bleach as it can damage the stainless steel drum and rubber components.
Dispenser Usage
Pour the cleaning agent directly into the drum, not into the detergent dispenser. This ensures the cleaning solution circulates properly throughout the entire tub.
Step-by-Step Tub Cleaning Process
Step 1: Preparation
Ensure machine is empty and clean around door seal. Check for foreign objects in drum.
Step 2: Add Cleaner
Add recommended amount of tub cleaner directly into the drum. Close door securely.
Step 3: Select Program
Press Tub Clean button on control panel. Machine will display estimated time (approx. 60-90 minutes).
Step 4: Start Cycle
Press Start/Pause button. Machine will begin heating water and cleaning process automatically.
Step 5: Completion
After cycle completes, leave door open to air dry. Wipe any remaining moisture from door seal.
Step 6: Maintenance
Run a quick rinse cycle if needed. Record cleaning date for maintenance tracking.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tub Clean cycle won't start | Door not closed properly, child lock activated | Ensure door is fully closed, check child lock status |
| Cycle stops unexpectedly | Power interruption, unbalanced load detection | Check power supply, ensure drum is empty, restart cycle |
| Odor persists after cleaning | Insufficient cleaning agent, hard water buildup | Use recommended amount of cleaner, repeat cycle if needed |
| Error code during cycle | Water supply issue, drainage problem | Check water supply and drain hose, consult error code guide |
| White residue after cleaning | Hard water minerals, detergent buildup | Use descaling agent, increase cleaning frequency |
| Mold around door seal | Moisture retention, infrequent cleaning | Wipe seal after each use, increase cleaning frequency |
Tub Clean Specific Error Codes
- tC E1: Temperature sensor error - Contact service center
- tC E2: Water heating issue - Check water supply and temperature settings
- tC E3: Drainage problem during clean cycle - Check drain hose and filter
- tC E4: Door not locking properly - Ensure door is fully closed
- tC E5: Motor issue during clean cycle - Contact service center
- tC E6: Communication error - Reset machine and restart cycle
Manual Downloads
Tub Clean Specific Manuals
TC-F4V9RYP2T
9.5kg ThinQ Tub Clean Guide
TC-F4V5RYP2T
9.5kg Steam Tub Clean
TC-F4V7RYP2S
9.5kg ThinQ Maintenance
TC-F4V9RYP2W
9.5kg White Tub Clean
Maintenance & Care Manuals
MC-F4V710S2W
10.5kg Maintenance Guide
MC-F4V909S2W
9kg Care & Cleaning
MC-F1296TD24
9kg ThinQ Maintenance
MC-F4J8VNP2W
8kg Care Manual