Installation Guide
Tools Needed:
- Vacuum pump with gauge manifold
- Torque wrench
- Flaring tool
- Pipe cutter
- Level
- Drill with various bits
- Refrigerant scale
Step-by-Step Installation
- Select Installation Location: Choose a solid wall location with proper clearance (minimum 15cm from ceiling, 50cm from obstacles).
- Install Mounting Plate: Secure the mounting plate to the wall using appropriate anchors and ensure it is perfectly level.
- Drill Wall Opening: Create a 70mm diameter hole through the wall for refrigerant pipes and drainage hose.
- Connect Refrigerant Pipes: Connect copper pipes between indoor and outdoor units, ensuring proper flaring and torque specifications.
- Connect Electrical Wiring: Connect power cables following local electrical codes and manufacturer specifications.
- Connect Drain Hose: Install drain hose with proper downward slope (minimum 1:100 gradient) for effective water drainage.
- Vacuum and Charge: Evacuate system to 500 microns vacuum for 15 minutes, then charge with specified refrigerant amount.
- Test Operation: Run system in cooling and heating modes to verify proper operation and check for leaks.
Specifications
Model Series | AS24UQF |
Type | Split System Air Conditioner |
Color | White / Platinum |
Cooling Capacity | 24,000 BTU/h |
Heating Capacity | 26,000 BTU/h |
Noise Level (Indoor) | 19 dB (Quiet Mode) |
Control Type | Wi-Fi Enabled with ThinQ App |
Energy Rating | A+++ (Most Efficient) |
Refrigerant | R32 (Environmentally Friendly) |
Power Requirements | 230V, 50Hz, 15A |
Dimensions (Indoor Unit) | 84 x 29 x 21 cm |
Weight (Indoor Unit) | 12 kg |
Operating Range (Cooling) | -10°C to 46°C Outdoor |
Warranty Information
- Full Warranty: 2 years parts and labor
- Compressor Warranty: 10 years on inverter compressor
- Extended Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Dual Inverter Compressor
LG's advanced dual inverter compressor provides precise temperature control, faster cooling, and up to 70% energy savings compared to conventional compressors.
ThinQ Smart Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor energy usage, set schedules, and control temperature from anywhere.
4-Way Air Deflection
Four-way air deflection system ensures even cooling throughout the room with wide-angle air distribution and precise directional control.
Auto Clean Function
Auto Clean function dries the indoor unit after use to prevent mold and bacteria growth, ensuring cleaner air and better hygiene.
Low Ambient Operation
Advanced technology allows operation in extreme temperatures from -10°C to 46°C, providing reliable performance in all weather conditions.
Plasma Air Purification
Built-in plasma air purification system removes up to 99.9% of airborne contaminants, including viruses, bacteria, and allergens.
Smart Control Features
Voice Control
Compatible with Google Assistant and Amazon Alexa for hands-free voice control
Energy Monitoring
Real-time energy consumption tracking and usage reports via ThinQ app
Smart Diagnosis
Automated system diagnosis and troubleshooting through smartphone app
Geofencing
Automatic temperature adjustment based on your location using GPS technology
Schedule Programming
Customizable weekly schedules for optimal comfort and energy efficiency
Guest Access
Share control access with family members or guests through the app
Troubleshooting
Problem | Possible Cause | Solution |
---|---|---|
Unit not cooling/heating | Power issue, remote control error, temperature setting | Check power supply, replace remote batteries, verify temperature settings |
Water leaking indoors | Clogged drain pipe, improper installation slope | Clean drain pipe, ensure proper downward slope of drain hose |
Unusual noises | Loose parts, debris in fan, improper installation | Tighten all fasteners, clean indoor/outdoor units, check installation |
Foul odor | Dirty filters, mold growth in drain pan | Clean filters, run Auto Clean function, clean drain pan |
Wi-Fi connection issues | Network problems, incorrect setup, signal interference | Check router settings, reinstall ThinQ app, ensure strong signal |
Ice formation on unit | Dirty filters, low refrigerant, airflow restriction | Clean filters, check refrigerant charge, ensure proper airflow |
Error Codes
- CH/O: Communication error - Check wiring between indoor and outdoor units
- E1/E2: Temperature sensor error - Replace faulty temperature sensors
- F1/F2: PCB error - Check main control board connections
- P1/P2: High/Low pressure error - Check refrigerant levels and compressor
- L5: Overcurrent protection - Check electrical connections and compressor
- U4: Communication error with remote - Check remote control and receiver
Manual Downloads
Current Model Manuals
AS24UQF
24,000 BTU ThinQ AC
AS18UQF
18,000 BTU ThinQ AC
AS12UQF
12,000 BTU ThinQ AC
AS09UQF
9,000 BTU ThinQ AC
Popular Previous Models
AS24UQC
24,000 BTU Standard AC
AS18UQC
18,000 BTU Standard AC
AS12UQC
12,000 BTU Standard AC
AS09UQC
9,000 BTU Standard AC