Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Connect Ventilation: Connect the exhaust vent to the dryer outlet using approved ducting materials.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Do not use an extension cord.
- Gas Connection (if applicable): For gas models, connect to gas supply using approved flexible gas connector.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | D9V9RYP2T |
| Type | Heat Pump Dryer |
| Color | Titanium / White |
| Capacity | 9 kg |
| Noise Level | 62 dB |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | A+++ (Most Efficient) |
| Energy Consumption | 152 kWh/year |
| Power Requirements | 230V, 50Hz, 16A |
| Dimensions (HxWxD) | 85 x 60 x 62 cm |
| Weight | 58 kg |
| Drying Technology | Heat Pump with Inverter Compressor |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Compressor Warranty: 10 years on Inverter Compressor
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Heat Pump Technology
Advanced heat pump technology recycles hot air to dry clothes efficiently, using up to 50% less energy compared to conventional dryers while being gentle on fabrics.
Inverter Compressor
The inverter compressor provides precise temperature control and operates more quietly and efficiently than traditional compressors, with longer lifespan and better performance.
Sensor Dry Technology
Intelligent moisture sensors detect when clothes are dry and automatically adjust drying time, preventing over-drying and saving energy while protecting your fabrics.
Steam Refresh
Steam technology removes wrinkles and odors from clothes, refreshing garments without the need for washing. Perfect for delicate items and quick refresh cycles.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, receive completion alerts, and diagnose issues remotely.
TurboDry™
This feature saves time without compromising drying performance, drying a full load quickly using optimized heat distribution and airflow patterns.
Drying Programs Explained
Cotton Eco
Energy-efficient drying for cotton fabrics with optimal temperature control
Mixed Load
Intelligent drying for mixed fabric types with automatic moisture detection
Delicate/Synthetic
Gentle low-temperature drying for delicate and synthetic fabrics
Wool
Special wool program that maintains woolmark certification standards
Quick Dry
Rapid drying for small loads or lightly damp items
Steam Refresh
Steam cycle to remove wrinkles and refresh clothes without washing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Clothes not drying | Overloading, clogged lint filter, ventilation issue | Reduce load size, clean lint filter, check ventilation system |
| Over-drying clothes | Wrong program selected, sensor malfunction | Select appropriate program, run sensor calibration |
| Unusual noises | Foreign objects in drum, worn rollers | Check for foreign objects, contact service for roller replacement |
| Error codes displayed | System malfunction, sensor issues | Refer to error code list, contact service if persistent |
| Vibration during operation | Unbalanced load, uneven floor | Redistribute load evenly, level the machine |
Error Codes
- tE: Temperature sensor error - Check temperature sensors
- dE: Door not closed properly - Ensure door is fully closed
- FE: Motor issue - Contact service center
- HE: Heating element error - Check heating system
- LE: Motor issue - Contact service center
- UE: Unbalanced load - Redistribute clothes and restart
Manual Downloads
Current Model Manuals
D9V9RYP2T
9kg ThinQ Heat Pump Dryer
D9V5RYP2T
9kg Steam Dryer
D9V7RYP2S
9kg ThinQ Condenser Dryer
D9V9RYP2W
9kg White Heat Pump Dryer
Popular Previous Models
D9V710S2W
10.5kg Heat Pump Dryer
D9V909S2W
9kg Steam Dryer
D1296TD24
9kg ThinQ Dryer
D9J8VNP2W
8kg Heat Pump Dryer