Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Vent hose clamp
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing, electrical connections, and venting on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washer dryer unit.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Install Vent System: Connect the dryer vent hose to the exhaust port and route to outside ventilation.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Unit: Adjust the leveling legs to ensure the washer dryer is level from front to back and side to side.
- Test Run: Run both wash and dry cycles to check for leaks and proper operation.
Specifications
| Model Series | WD-F4V9RYP2T |
| Type | Front Load Washer Dryer Combo |
| Color | Titanium / White |
| Wash Capacity | 9.5 kg |
| Dry Capacity | 6.0 kg |
| Noise Level (Wash/Spin/Dry) | 53 dB / 70 dB / 65 dB |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9,500 L/year |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 85 x 60 x 65 cm |
| Weight | 78 kg |
| Max Spin Speed | 1400 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Dryer System Warranty: 5 years on heating system
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Direct Drive Motor
LG's innovative Direct Drive motor connects directly to the drum without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency for both washing and drying functions.
All-in-One Design
Combines washing and drying functions in a single unit, saving space and eliminating the need to transfer laundry between machines.
6 Motion DD Technology
Six different wash motions can be combined to provide the optimal wash for any fabric type, from gentle handling of delicates to powerful cleaning of heavily soiled items.
Sensor Dry System
Advanced moisture sensors detect when clothes are dry and automatically adjust drying time, preventing over-drying and saving energy.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts for both wash and dry cycles.
Condensation Drying
No external venting required in most installations. Uses condensation technology to dry clothes efficiently without hot air exhaust.
Wash and Dry Programs
Cotton Eco
Energy-efficient program for normal cotton fabrics with automatic drying
Mix Fabric
Combined wash and dry program for mixed fabric loads
Quick Wash & Dry
Rapid complete cycle for lightly soiled items
Delicates
Gentle wash with low-temperature drying for delicate fabrics
Sports Wear
Special program for athletic clothing with odor removal
Baby Care
Hygienic wash with steam and thorough drying
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor drying results | Overloading, clogged filter, incorrect program | Reduce load size, clean lint filter, select appropriate program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Clothes still wet after drying | Overloaded, filter clogged, insufficient drying time | Reduce load size, clean filters, extend drying time |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the machine, ensure shipping bolts removed |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- tE: Temperature sensor error - Contact service center
- HE: Heater error - Check dryer heating system
Manual Downloads
Current Model Manuals
WD-F4V9RYP2T
9.5kg AI DD™ Washer Dryer
WD-F4V5RYP2T
9.5kg Steam Washer Dryer
WD-F4V7RYP2S
9.5kg ThinQ Washer Dryer
WD-F4V9RYP2W
9.5kg White Washer Dryer
Popular Previous Models
WD-F4V710S2W
10.5kg DD Washer Dryer
WD-F4V909S2W
9kg Steam Washer Dryer
WD-F1296TD24
9kg ThinQ Washer Dryer
WD-F4J8VNP2W
8kg DD Washer Dryer