Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washer dryer.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet. Do not use an extension cord.
- Ventilation Setup: Ensure proper ventilation for drying function with adequate airflow.
- Level the Washer Dryer: Adjust the leveling legs to ensure the unit is level from front to back and side to side.
- Test Run: Run the washer dryer through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | F4V9RYP3T |
| Type | Front Load Washer Dryer Combo |
| Color | Titanium / Black |
| Wash Capacity | 9.6 kg |
| Dry Capacity | 6 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 9,200 L/year |
| Power Requirements | 230V, 50Hz, 16A |
| Dimensions (HxWxD) | 85 x 60 x 65 cm |
| Weight | 72 kg |
| Max Spin Speed | 1400 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Direct Drive Motor
LG's innovative Direct Drive motor connects directly to the drum without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency.
Inverter Technology
The advanced inverter motor provides precise control over washing and drying motions, resulting in better cleaning with less damage to fabrics and reduced energy consumption.
6 Motion DD Technology
Six different wash motions can be combined to provide the optimal wash for any fabric type, from gentle handling of delicates to powerful cleaning of heavily soiled items.
Heat Pump Drying
Energy-efficient heat pump technology provides gentle drying at lower temperatures, protecting fabrics while reducing energy consumption by up to 50%.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
TurboWash™ & TurboDry™
These features save time without compromising performance, washing a full load in just 59 minutes and drying efficiently with optimized cycles.
Drying Programs
Cotton Dry
Standard drying program for cotton fabrics with adjustable dryness levels
Synthetic Dry
Gentle drying program for synthetic fabrics at lower temperatures
Mix Dry
Automatic drying for mixed fabric loads with sensor control
Time Dry
Manual drying with adjustable time settings from 10-180 minutes
Wool Dry
Special gentle drying program for woolen items
Quick Dry
Rapid drying for small loads in minimum time
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer dryer won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor drying results | Overloading, lint filter clogged, incorrect program | Reduce load size, clean lint filter, select appropriate drying program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual drying noises | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
| Clothes remain damp | Overloaded, lint filter blocked, incorrect program | Reduce load size, clean lint filter, select correct drying program |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- tE: Temperature sensor error - Contact service center
- HE: Heating element error - Check drying function
Manual Downloads
Current Model Manuals
F4V9RYP3T
9.6kg AI DD™ Washer Dryer
F4V5RYP3T
9.6kg Steam Washer Dryer
F4V7RYP3S
9.6kg ThinQ Washer Dryer
F4V9RYP3W
9.6kg White Washer Dryer
Popular Previous Models
F4V710S3W
10.5kg DD Washer Dryer
F4V909S3W
9kg Steam Washer Dryer
F1296TD25
9kg ThinQ Washer Dryer
F4J8VNP3W
8kg DD Washer Dryer