Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washer dryer.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet. Do not use an extension cord.
- Ventilation Setup: Ensure proper exhaust ventilation for drying function with minimum bends in ducting.
- Level the Washer Dryer: Adjust the leveling legs to ensure the unit is level from front to back and side to side.
- Test Run: Run both wash and dry cycles to check for leaks and proper operation.
Specifications
| Model Series | F4V8RYP2T |
| Type | Front Load Washer Dryer Combo |
| Color | Titanium / White |
| Wash Capacity | 8 kg |
| Dry Capacity | 5 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | A++ (Most Efficient) |
| Water Consumption | 8,200 L/year |
| Power Requirements | 230V, 50Hz, 16A |
| Dimensions (HxWxD) | 85 x 60 x 59 cm |
| Weight | 72 kg |
| Max Spin Speed | 1400 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Direct Drive Motor
LG's innovative Direct Drive motor connects directly to the drum without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency.
Inverter Technology
The advanced inverter motor provides precise control over washing and drying motions, resulting in better cleaning with less damage to fabrics and reduced energy consumption.
6 Motion DD Technology
Six different wash motions can be combined to provide the optimal wash for any fabric type, from gentle handling of delicates to powerful cleaning of heavily soiled items.
Heat Pump Drying
Energy-efficient heat pump technology gently dries clothes at lower temperatures, protecting fabrics while reducing energy consumption by up to 50% compared to conventional dryers.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.
All-in-One Operation
Complete laundry solution in one unit - wash and dry clothes in a single cycle without needing to transfer loads between machines.
Drying Programs
Cotton Dry
Standard drying program for cotton fabrics with adjustable dryness levels
Synthetic Dry
Gentle drying for synthetic fabrics at lower temperatures
Delicate Dry
Extra gentle drying for delicate fabrics like silk and wool
Quick Dry
Rapid drying for small loads in minimum time
Time Dry
Manual drying with adjustable time settings
Anti-Crease
Special program to minimize wrinkles in dried clothes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer dryer won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Clothes not drying properly | Overloading, clogged filter, incorrect program | Reduce load size, clean lint filter, select proper drying program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises during drying | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- tE: Temperature sensor error - Contact service center
- HE: Heater error - Check ventilation and contact service
Manual Downloads
Current Model Manuals
F4V8RYP2T
8kg AI DD™ Washer Dryer
F4V8RYP2S
8kg Steam Washer Dryer
F4V8RYP2W
8kg ThinQ Washer Dryer
F4V8RYP2B
8kg Black Washer Dryer
Popular Previous Models
F4V710S2W
7kg DD Washer Dryer
F4V909S2W
9kg Steam Washer Dryer
F1296TD24
8kg ThinQ Washer Dryer
F4J7VNP2W
7kg DD Washer Dryer