Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washer dryer.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet. Do not use an extension cord.
- Ventilation Setup: Ensure proper ventilation for drying function with adequate airflow.
- Level the Washer Dryer: Adjust the leveling legs to ensure the unit is level from front to back and side to side.
- Test Run: Run the washer dryer through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | F4V8RYP2T |
| Type | Front Load Washer Dryer Combo |
| Color | Titanium / White |
| Wash Capacity | 8.5 kg |
| Dry Capacity | 5.0 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | A+++ (Most Efficient) |
| Water Consumption | 8,200 L/year |
| Power Requirements | 230V, 50Hz, 13A |
| Dimensions (HxWxD) | 84 x 59 x 60 cm |
| Weight | 72 kg |
| Max Spin Speed | 1400 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Direct Drive Motor
LG's innovative Direct Drive motor connects directly to the drum without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency in both washing and drying cycles.
Inverter Heat Pump Drying
Energy-efficient heat pump technology provides gentle drying at lower temperatures, protecting fabrics while reducing energy consumption by up to 50% compared to conventional dryers.
6 Motion DD Technology
Six different wash motions can be combined to provide the optimal wash for any fabric type, from gentle handling of delicates to powerful cleaning of heavily soiled items.
Steam Technology
Steam technology helps to remove tough stains, reduce allergens, and minimize wrinkles in both washing and drying cycles, leaving clothes fresh and hygienically clean.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts for both wash and dry cycles.
All-in-One Operation
Complete laundry solution in one unit - wash and dry clothes without transferring loads, saving space and time with automatic cycle transition.
6 Motion DD Technology Explained
Tumbling
Gentle up-and-down motion ideal for delicate fabrics
Swinging
Left-right motion with less water for synthetic fabrics
Scrubbing
Intensive cleaning action for heavily soiled cotton items
Filtration
Rolling motion that helps separate lint from fabrics
Stepping
Stepping motion that mimics hand washing for woolens
Swinging
Gentle motion for large items like bedding
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer dryer won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Clothes not drying properly | Overloading, lint filter clogged, incorrect drying program | Reduce load size, clean lint filter, select appropriate drying program |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises during operation | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- HE: Heating element issue - Contact service center
- TE: Temperature sensor issue - Contact service center
Manual Downloads
Current Model Manuals
F4V8RYP2T
8.5kg AI DD™ Washer Dryer
F4V6RYP2T
8.5kg Steam Washer Dryer
F4V8RYP2S
8.5kg ThinQ Washer Dryer
F4V8RYP2W
8.5kg White Washer Dryer
Popular Previous Models
F4V710S2W
7.5kg DD Washer Dryer
F4V909S2W
9kg Steam Washer Dryer
F1296TD24
8kg ThinQ Washer Dryer
F4J7VNP2W
7kg DD Washer Dryer