Installation Guide
Tools Required:
- Adjustable wrench
- Spirit level
- Screwdriver set
- Pipe wrench
- Measuring tape
Step-by-Step Installation Process
- Location Selection: Choose a stable, level surface near water and electrical connections with adequate ventilation.
- Remove Packaging: Carefully remove all shipping materials and transit bolts from the washing machine.
- Water Connection: Connect hot and cold water supply lines to the appropriate inlet valves using new hoses.
- Drain Setup: Install drain hose with proper high loop configuration to prevent siphoning and backflow.
- Power Connection: Connect to grounded 220-240V, 50Hz electrical outlet. Avoid using extension cords.
- Level Adjustment: Adjust front leveling feet to ensure machine is perfectly level in all directions.
- Initial Test: Run empty calibration cycle to verify proper installation and check for leaks.
Specifications
| Technology | Direct Drive Inverter Motor |
| Loading Type | Front Loading Design |
| Available Colors | Titanium, White, Black Stainless |
| Capacity Range | 8kg - 12kg Models Available |
| Noise Level | 52 dB (Wash) / 68 dB (Spin) |
| Control Interface | LED Touch Display with Dial Control |
| Energy Efficiency | A+++ Energy Rating |
| Water Efficiency | AI Water Optimization Technology |
| Power Specifications | 220-240V, 50Hz, 10A |
| Dimensions | 85 x 60 x 60 cm (Standard) |
| Weight | 68-72 kg (Depending on Model) |
| Spin Speed | Up to 1400 RPM |
Warranty Coverage
- Comprehensive Warranty: 2 years on all parts and labor
- Motor Warranty: 10 years on Direct Drive Inverter Motor
- Extended Options: Additional warranty packages available
For warranty claims and service, contact LG Support at 1-800-LG-CARE or visit LG Support Portal
Key Features
Direct Drive Inverter Motor
Advanced motor technology that connects directly to the drum, eliminating belts and pulleys for quieter operation, reduced vibration, and enhanced durability.
Smart Inverter Control
Precise motor control technology that optimizes washing performance while minimizing energy consumption and wear on fabrics.
6 Motion DD Technology
Multiple wash motions including tumbling, swinging, scrubbing, filtration, stepping, and rolling for optimal cleaning of all fabric types.
SteamCare Technology
Integrated steam function that removes tough stains, reduces allergens, and refreshes clothes without washing.
LG ThinQ Technology
Smart connectivity allowing remote control, cycle monitoring, and custom program downloads via smartphone application.
TurboWash 360°
Advanced washing system that cleans full loads in under an hour using multi-directional water jets and optimized drum action.
Wash Motion Technology
Gentle Tumbling
Soft up-and-down motion perfect for delicate fabrics and silk
Intensive Swinging
Side-to-side action for synthetic materials with less water usage
Powerful Scrubbing
Strong cleaning motion for heavily soiled cotton and workwear
Smart Filtration
Rolling action that effectively separates and removes lint particles
Hand Wash Simulation
Gentle stepping motion that replicates careful hand washing
Large Item Care
Special motion for bedding, curtains, and other bulky items
Troubleshooting
| Issue | Potential Cause | Resolution |
|---|---|---|
| Machine not starting | Power disruption, door ajar, child lock engaged | Verify power supply, ensure door closure, check lock settings |
| Inadequate cleaning | Overloading, incorrect detergent, wrong cycle selection | Adjust load size, use HE detergent, select proper wash program |
| Water drainage problems | Clogged drain filter, kinked hose, pump obstruction | Clean drain filter, straighten hose, check pump for blockages |
| Water leakage | Damaged door seal, over-sudsing, loose connections | Inspect door seal, reduce detergent, tighten all connections |
| Unusual operating sounds | Foreign objects, unbalanced load, mechanical issues | Check drum for objects, balance load, contact service if persistent |
| Excessive vibration | Uneven flooring, load imbalance, installation issues | Level machine, redistribute load, verify installation |
Common Error Codes
- IE Error: Water inlet problem - Check water supply and pressure
- OE Error: Drainage issue - Inspect drain system and pump
- FE Error: Flood detection - Check for leaks and overflow
- LE Error: Motor malfunction - Requires professional service
- dE Error: Door not secured - Ensure proper door closure
- UE Error: Unbalanced load - Redistribute clothing and restart
Manual Downloads
Direct Drive Inverter Series Manuals
F4V912S2W
12kg AI DD™ Inverter Washer
F4V910S2T
10kg Steam Inverter Washer
F4V908S2B
8kg ThinQ Inverter Washer
F4V911S2W
11kg White Inverter Washer
Previous Direct Drive Models
F4V710S2W
10.5kg DD Inverter Washer
F4V909S2W
9kg Steam Inverter Washer
F1296TD24
9kg ThinQ Inverter Washer
F4J8VNP2W
8kg DD Inverter Washer