Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washer dryer combo.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, AC only outlet. Do not use an extension cord.
- Ventilation Setup: Install proper exhaust venting for dryer function according to local building codes.
- Level the Unit: Adjust the leveling legs to ensure the washer dryer is level from front to back and side to side.
- Test Run: Run both wash and dry cycles to check for leaks and proper operation.
Specifications
| Model Series | WD100CV |
| Type | Front Load Washer Dryer Combo |
| Color | Graphite Steel / Black Stainless |
| Wash Capacity | 4.5 cu. ft. |
| Dry Capacity | 3.5 cu. ft. |
| Noise Level (Wash/Dry) | 55 dB / 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 8,500 L/year |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 74 x 27 x 30 inches |
| Weight | 185 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Dryer System Warranty: 5 years on dryer components
- Additional Coverage: Optional extended warranty available
For warranty service, contact LG Customer Service at 1-800-243-0000 or visit LG.com
Key Features
Direct Drive Motor
LG's innovative Direct Drive motor connects directly to the drum without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency for both washing and drying functions.
Inverter Heat Pump Technology
The advanced inverter heat pump dryer uses up to 50% less energy than conventional dryers while providing gentle, efficient drying for all fabric types.
All-in-One Design
Combines washing and drying functions in a single unit, saving space and eliminating the need to transfer laundry between machines.
Steam Technology
Steam technology helps to remove tough stains, reduce allergens, and refresh clothes without washing, leaving clothes fresh and hygienically clean.
SmartThinQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts for both wash and dry cycles.
TurboWash™ & TurboDry™
These features save time without compromising performance, washing a full load in just 30 minutes and drying in under an hour using optimized cycles.
Wash & Dry Programs
Normal Wash
Standard cleaning for everyday cotton items with automatic drying
Heavy Duty
Intensive cleaning for heavily soiled items with extended drying
Delicates
Gentle wash and low-heat dry for delicate fabrics
Quick Wash & Dry
Rapid complete cycle for lightly soiled items
Bedding
Special cycle for large items like comforters and sheets
Sanitary
High-temperature wash and dry to eliminate bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect program | Reduce load size, use correct detergent, select appropriate program |
| Clothes not drying properly | Overloading, lint filter clogged, vent blocked | Reduce load size, clean lint filter, check venting |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
Error Codes
- IE: Water supply issue - Check water supply and inlet valve
- OE: Drain issue - Check drain hose and pump
- FE: Flooding detected - Check for leaks and water supply
- LE: Motor issue - Contact service center
- dE: Door not closed properly - Ensure door is fully closed
- UE: Unbalanced load - Redistribute clothes and restart
- HE: Heating element issue - Contact service center
- tE: Temperature sensor error - Contact service center
Manual Downloads
Current Model Manuals
WD100CV
4.5 cu.ft. Washer Dryer Combo
WD90T
4.2 cu.ft. ThinQ Combo
WD80V
4.0 cu.ft. Ventless Combo
WD70C
3.8 cu.ft. Compact Combo
Popular Previous Models
WD120C
5.0 cu.ft. Large Capacity
WD100B
4.5 cu.ft. Basic Model
WD90S
4.2 cu.ft. Steam Combo
WD80M
4.0 cu.ft. Mid-range