Inverter Direct Drive Dishwasher

User Manual & Installation Guide

14 Place Settings

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe cutter
  • Tape measure

Step-by-Step Installation

  1. Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses.
  4. Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series DDI14S2T
Type Built-in Dishwasher
Color Stainless Steel / Black
Capacity 14 Place Settings
Noise Level 39 dB
Control Type Touch Controls with LED Display
Energy Rating A+++ (Most Efficient)
Water Consumption 9.5 L/cycle
Power Requirements 230V, 50Hz, 10A
Dimensions (HxWxD) 82 x 60 x 55 cm
Weight 45 kg
Drying System Heat Exchange + Zeolite

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Customer Service at 1-800-243-0000 or visit manufacturer website

Key Features

Direct Drive Motor

Innovative Direct Drive motor connects directly to the wash system without belts or pulleys, reducing noise and vibration while increasing reliability and efficiency.

Inverter Technology

The advanced inverter motor provides precise control over water pressure and spray patterns, resulting in better cleaning with less energy consumption.

Multi-Spray Technology

Multiple spray arms with different patterns can be combined to provide optimal cleaning for any load type, from delicate glassware to heavily soiled pots.

Steam Technology

Steam technology helps to remove tough, dried-on food residues, sanitize dishes, and reduce water spots, leaving dishes hygienically clean.

Smart Control Technology

Wi-Fi enabled for remote control via smartphone app, allowing you to monitor cycle status, download additional programs, and receive completion alerts.

QuickWashâ„¢

This feature saves time without compromising cleaning performance, washing a full load in just 30 minutes using powerful spray jets and optimized water temperature.

Wash Programs Explained

Auto Wash

Automatically detects soil level and adjusts water temperature and cycle time

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes

Eco Wash

Energy-efficient cycle with lower temperature and water consumption

Glass Care

Gentle cycle for delicate glassware and crystal

Quick Wash

Fast 30-minute cycle for lightly soiled dishes

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid, check heating element function

Error Codes

  • IE: Water supply issue - Check water supply and inlet valve
  • OE: Drain issue - Check drain hose and pump
  • FE: Flooding detected - Check for leaks and water supply
  • LE: Motor issue - Contact service center
  • dE: Door not closed properly - Ensure door is fully closed
  • HE: Heating element issue - Check heating element function

Manual Downloads

Current Model Manuals

DDI14S2T

14 Place Settings DD Dishwasher

DDI14S2B

14 Place Settings Black DD

DDI12S2T

12 Place Settings DD Dishwasher

DDI16S2T

16 Place Settings DD Dishwasher

Popular Previous Models

DDI14P2W

14 Place Settings DD

DDI12S2W

12 Place Settings Steam

DDI10T2T

10 Place Settings ThinQ

DDI8S2W

8 Place Settings DD

Note: For models not listed here, please visit the manufacturer Support Website for complete documentation.